One of the very common pool surfaces is paint. Pool paints come in many colors, and are an economical coating compared to other surfaces. There are mainly three types of pool paint. Epoxy paint is used for new construction, fiberglass pools, and pools that are painted previously with epoxy paint. It lasts long, is durable, and will stand up to UV rays, automatic pool cleaners, and other chemical treatments. Epoxy paint would last about 7 – 10 years. 

Another type is a chlorinated rubber base. It is not as durable or expensive as epoxy paint but is dependable, easy to use, and inexpensive. It is easy to apply, comes in many colors, and will last about 3 – 5 years. Last but not least, is the water-based acrylic pool paint. This can be used on any type of surface, is easy to apply, and cleans up with water. This type is ideal for commercial applications that are repainted on a standard basis. It lasts about 2 – 3 years. No matter which paints you use, it is essential to follow the manufacturer’s instructions, follow suggested safety guidelines and make sure that you prepare the pool properly. Preparation is the most important step involved in pool painting. Without proper preparation, the paint will not bond to the wall or existing surface.

My Pool Paint is fading: Painted pools will start to fade over time. Nothing could stop this, but you can “brighten up” the paint with a light acid wash. The acid removes any dirt and chalking that can dull a paint job. After cleaning the pool with a lighter solution of muriatic acid and water, rinse and refill the pool.

My Pool Paint has Blisters and Bubbles: Blistering is always caused by improper preparation. The pool paint should be applied to a clean dry surface. If the paint is applied very thick, if the surface is very hot, or if the pool is not cleaned suitably, it will blister. Application heat will also affect the final result. The only solution is to repaint the pool or the spots that have blistered.